|  |  |
1.4mm HVLP PAINT SPRAYER GUN
Price $30
Item Number: AUTOSPRGN003
AVAILABLE
New Professional Gravity Feed Production HVLP(High Volume Low Pressure) Sprayer with 1.4mm Fluid Tip and Regulator. This sprayer supplies low pressure through the air cap which makes the spraying softer, easily controlled and less over spray in high transfer efficiency. Ideal for spraying base coats, clear coats and other light to medium viscosity coatings!
Features:
Designed to provide equal atomization and particle size for all kinds of surface painting.
Stainless steel needle and nozzle accommodate a variety of coatings.
Light weight, ergonomic design and easy trigger pivot reduces operating fatigue.
Precise 1.4mm stainless steel needle and nozzle set.
3 Knobs for full adjustment: Fluid, Pattern and Air Pressure Controls.
1000 ML Stainless Steel Fluid Cup with Lid.
Comes with a True Micrometer Air Regulator with Gauge as free gift.
Specifications:
Air Inlet 1/4"
Type of Feed Gravity
Diameter of Nozzle 1.4mm
Recommended Air Pressure 29-50.7 PSI (2.0-3.5 BAR)
Max. Pressure of Air 90 PSI (6.2 BAR)
Paint Capacity 1000 ML
Average Air Consumption 4.2-7.1 CMF (117-199 L/MIN)
Pattern Width 7.1" -9.84"
A-weighted Sound Pressure Level 74.5 dB(A)
Sound Power Level 85.5 dB(A)
Fine Adjustment:
The desired pattern and fine atomization can be easily obtained by regulating the Pattern Adjusting Knob and Fluid Adjusting Knob.
Pattern Adjustment: Turn the Pattern Adjusting Knob to the right until tight will make spray pattern round, or turn left make spray pattern ellipse.
Fluid Adjustment: Turn the Fluid Adjusting Knob clockwise will decrease the volume of fluid output and counter-clockwise will increase fluid output.
Package Includes:
1x HVLP Sprayer with a 1.4mm Fluid Tip
1x 1000ml Stainless Steel Cup with Lid
1x True Micrometer Air Regulator with Gauge
1x Spanner Wrench
1x Hex Wrench
1x Screw set
1x Brush
2x Cup Filters
1x Manual (General for some models)
Features:
Designed to provide equal atomization and particle size for all kinds of surface painting.
Stainless steel needle and nozzle accommodate a variety of coatings.
Light weight, ergonomic design and easy trigger pivot reduces operating fatigue.
Precise 1.4mm stainless steel needle and nozzle set.
3 Knobs for full adjustment: Fluid, Pattern and Air Pressure Controls.
1000 ML Stainless Steel Fluid Cup with Lid.
Comes with a True Micrometer Air Regulator with Gauge as free gift.
Specifications:
Air Inlet 1/4"
Type of Feed Gravity
Diameter of Nozzle 1.4mm
Recommended Air Pressure 29-50.7 PSI (2.0-3.5 BAR)
Max. Pressure of Air 90 PSI (6.2 BAR)
Paint Capacity 1000 ML
Average Air Consumption 4.2-7.1 CMF (117-199 L/MIN)
Pattern Width 7.1" -9.84"
A-weighted Sound Pressure Level 74.5 dB(A)
Sound Power Level 85.5 dB(A)
Fine Adjustment:
The desired pattern and fine atomization can be easily obtained by regulating the Pattern Adjusting Knob and Fluid Adjusting Knob.
Pattern Adjustment: Turn the Pattern Adjusting Knob to the right until tight will make spray pattern round, or turn left make spray pattern ellipse.
Fluid Adjustment: Turn the Fluid Adjusting Knob clockwise will decrease the volume of fluid output and counter-clockwise will increase fluid output.
Package Includes:
1x HVLP Sprayer with a 1.4mm Fluid Tip
1x 1000ml Stainless Steel Cup with Lid
1x True Micrometer Air Regulator with Gauge
1x Spanner Wrench
1x Hex Wrench
1x Screw set
1x Brush
2x Cup Filters
1x Manual (General for some models)